JULABO
In order to setup Julabo device properly, the following settings must be set:
- Interface serial
- Setpoint external source
- Remote control
CONFIGURATION
INTERFACE SERIAL
Press Menu button and select Interface serial
Type
Then select Type and choose RS232
Baudrate
Then select Baudrate and choose 9600
Parity
Then select Parity and choose even
Handshake
Then select Handshake and choose Hardware
SETPOINT EXTERNAL SOURCE
Press Menu button and select Setpoint ext and then choose off
REMOTE CONTROL
Press Menu button and select Configuration
Select Remote and choose on option
In order to check if Remote Control is ON, device screen will display a capital R on it